Racing Frames
Quadrysteria RUSH 3" V2
Multirotors → FPV Racing drones → Racing Frames → 3" frames → Quadrysteria RUSH 3" V2![Quadrysteria RUSH 3 Quadrysteria RUSH 3](http://cdn.shopify.com/s/files/1/1436/1524/products/orange_2fa35ca1-8cae-412f-a61a-7f2c23b059fa.png)
The RUSH 3 is 150mm size little "bulldog" designed for full size electronics, ESCs, motors and 3-Inch propellers. Equipped with 1608 - 1806 motors 3100kv, 3045-T Basher Bullnose props, and 4S power, it has full size speed too! However, for the less experienced pilot a 3S power setup is possible. The RUSH 3-Inch is waiting for you to pilot through small spaces at high speed!
Constructed of 3.0mm unibody high quality twill weave carbon fiber for easy construction and durability. Our new QXC carbon fiber plates are constructed using the highest strength standard modulus fibers available - T700. These never-twisted carbon fibers are prepregged then bonded into a high strength armor plate. T700 fiber is used in a variety of industrial and recreational applications, including pressure vessels such as natural gas storage tanks and SCUBA breathing tanks.
Features
- QXC Carbon Fiber Plate with lifetime airframe warranty!
- Weight: 52g
- All parts compatible with V1
- Flex TPU FPV camera mounting (micro) and 20mm anodized knarled aluminum standoffs
- Motor mounting from 12 x 12mm through 16 x 16mm center-to-center
- Optional Flex TPU GoPro Session and Hero mounts available
- Self-adhesive Neoprene foam tape battery pad
- Motor-to-Motor: 150mm
- AUW: 220g (without battery)
Included with every frame
- QXC Carbon Fiber Plates (4pcs)
- M3 anodized aluminum screws and aluminum standoffs
- Nylon hardware for low profile PDB and FC mount
- 17.5cm Quadrysteria anti-slip Battery strap
- Self-adhesive velcro squares for battery tie down
- 3M double-side foam tape (for ESCs)
- Exploded assembly schematic with instructions
Recommended Electronics
- Matek F405-CTR AIO Flight Controller (integrated PDB and OSD)
- ESCs: BLHeli_S DSHOT capable 30 Amp
- Motors: BrotherHobby Tornado T2 1608 3200kv
- RaceKraft 3045 Bullnose propellers
- RaceKraft 3030 Quad Blade propellers
- XT60 battery pigtail
Recommended FPV Electronics
- Matek VTX-HV 25/200/500mW 5.8GHz Video Transmitter
- Runcam Micro Sparrow 2
- TBS Triumph Stubby antenna (1pc)
Optional Accessories
- GoLo Kit - Color change kit (20mm stack and TPU micro camera mount)
- GoPro Session mount made of flexible TPU - Basher Proof
- GoPro Hero mount made of flexible TPU
Lifetime Airframe Warranty
If a high speed crash results in breakage, Quadrysteria is offering a "no questions asked" limited lifetime warranty for the V2 RUSH frame (made with QXC carbon fiber). Parts covered are: all carbon fiber parts, all M3 aluminum standoffs, all M3 aluminum screws.
See also
![3 3](/i/no-photo-category.png)